Contraste
Tiles and Derivatives
Ínico do conteúdo da página
Tile
Product Description
Product made from sheet steel through a forming process, whose cross section is similar to a sequence of sine or trapezoidal waves.
Shape
Available Dimensions
| MATERIAL | TYPE | THICKNESS (mm) |
USEFUL WIDTH (mm) | TOLERANCE WIDTH (mm) |
LENGTH* (mm) |
TOLERANCE LENGTH (mm) |
HEIGHT WAVE (mm) |
TOLERANCE WAVE (mm) |
|||
| Minimum | Maximum | Minimum | Maximum | Minimum | Maximum | ||||||
| Zinc Galvalume Pre-painted |
TP 25 (Trapezoidal) |
0.32 | 0.95 | 1026 | ± 3.0 | 1,000 | 12,000 | -5.0 | +10.0 | 25.0 | ±2.0 |
| TP 40-1 (Trapezoidal) |
0.32 | 0.95 | 980 | ± 3.0 | 1,000 | 12,000 | -5.0 | +10.0 | 37.0 | ±2.0 | |
| OND 17 (Corrugated) |
0.35 | 0.95 | 985 | ± 3.0 | 1,000 | 12,000 | -5.0 | + 5.0 | 17.0 | ±2.0 | |
Note:
* Other lengths upon request.
Ridge
Product Description
Product with a trapezoidal or corrugated section made from profiling of steel coils, then folded in its central section. Used in the composition of covers, being positioned in the upper (top) section where waters meet.
Shape
Available Dimensions
| MATERIAL | TYPE | THICKNESS (mm) |
USEFUL WIDTH (mm) |
TOLERANCE WIDTH (mm) |
FOLDING ANGLE | COMP. OF FLAPS* (mm) |
TOLERANCE LENGTH (mm) |
HEIGHT WAVE (mm) |
TOLERANCE WAVE (mm) |
||
| Minimum | Maximum | Minimum | Maximum | ||||||||
| Zinc Galvalume Pre-painted |
TP 25 (Trapezoidal) |
0.35 | 0.95 | 1026 | ± 3.0 | 160º | 2X300 | -5.0 | +10.0 | 25.0 | ±2.0 |
| TP 40-1 (Trapezoidal) |
0.35 | 0.95 | 980 | ± 3.0 | 160º | 2X300 | -5.0 | +10.0 | 37.0 | ±2.0 | |
| OND 17 (Corrugated) |
0.35 | 0.95 | 985 | ± 3.0 | 160º | 2X300 | -5.0 | + 5.0 | 17.0 | ±2.0 | |
Notes:
* Other lengths upon request.
Steel Deck
Product Description
Product with a trapezoidal section made from profiling of steel coils. Used as a support element and cooperating material in the composition of mixed steel/concrete slab with embedded steel shape.
Shape
Available Dimensions
| MATERIAL | THICKNESS (mm) |
WIDTH (mm) |
TOLERANCE WIDTH (mm) |
LENGTH* (mm) |
TOLERANCE LENGTH (mm) |
HEIGHT WAVE (mm) |
TOLERANCE WAVE (mm) |
||
| Mínimo | Máximo | Mínimo | Máximo | ||||||
| Galvanized | 0.8 | 958 | ±3.0 | 600 | 12,000 | -5 | 10 | 63.5 | ±2.0 |
| 0.95 | 958 | ±3.0 | 600 | 12,000 | -5 | 10 | 63.5 | ±2.0 | |
| 1.25 | 958 | ±3.0 | 600 | 12,000 | -5 | 10 | 63.5 | ±2..0 | |
Wainscot
Product Description
Product with corrugated section made from steel coil forming; used by sawmills for residential and commercial doors and gates.
Shape
Available Dimensions
| MATERIAL | THICKNESS (mm) |
USEFUL WIDTH (mm) |
TOLERANCE WIDTH (mm) |
LENGTH* (mm) |
TOLERANCE LENGTH (mm) |
|||
| Minimum | Maximum | Minimum | Maximum | Minimum | Maximum | |||
| Cold rolled | 0.70 | 1.00 | 1,085 | ± 3.0 | 2,000 | 8,000 | -5.0 | +10.0 |
| Zinc / Galvalume | 0.70 | 1.00 | 1,085 | ± 3.0 | 2,000 | 8,000 | -5.0 | +10.0 |
| Pre-painted Galvalume / Zinc | 0.70 | 1.00 | 1,085 | ± 3.0 | 2,000 | 8,000 | -5.0 | +10.0 |
Note:
* Other lengths upon request.