CSN 50 Rebar

CSN 50 Rebar

With a round core geometric configuration especially designed for greater adherence to concrete and high performance in Cutting and Bending equipment, CSN 50 Rebar was developed using very high level technology, fully meeting the specifications for the CA-50 category of ABNT NBR 7480 brazilian standard.

All CSN 50 series products have a certificate of approval issued by the product certifying body accredited by the National Institute of Metrology, Quality and Technology (INMETRO).

Nominal Diameter Nominal Mass
(kg/m)
Bar Nominal Weight
(kg)
Bending Pin Minimum Diameter
(mm)
Sold as
(mm) (Inches)
6.3 1/4 0.245 2.9 19

Rolls with standard weight of 2,000 kg.

Straight or bent bar bundles weighing 1,000 kg or 2,000 kg and standard length of 12 m.

Bars with special lengths on request.

Cut and bent rebar

8.0 5/16 0.395 4.7 24
10.0 3/8 0.617 7.4 30
12.5 1/2 0.963 11.6 38
16.0 5/8 1.578 18.9 48
20.0 3/4 2.466 29.6 120
25.0 1 3.853 46.2 150
32.0 1 1/4 6.313 75.8 192

Note¹: Calculation of a bar‘s nominal weight considers the standard length of 12m.
Note²: Bending pin minimum diameter according to the product‘s technical standard ABNT NBR 7480

Process Control

The CSN 50 Rebar is produced with rigorous metrological monitoring (Geometry, Linear Mass and Length), where all control, inspection and release processes are carried out by a specialized technical team, using modern laboratories with proper equipment that meet the most stringent standards required by ABNT NBR ISO 10012 and ABNT NBR ISO/IEC 17025 standards.

Mill Test Certificate

Every supply of CSN 50 Rebar comes with a mill test certificate, where the traceability of the material is ensured individually for each bundle or roll, containing the results obtained in mechanical tests for release.

Identification Label

The rolls and bundles of CSN 50 Rebar are identified with a label specifying the product traceability information and INMETRO safety seal.

The rolls have a standard weight of 2,000 kg and two identification labels are attached to their ends, identifying the correct way to uncoil them.

CSN 25 Rebar

With a smooth surface and produced according to the specifications of category CA-25 of ABNT NBR 7480 brazilian standard, the CSN 25 Rebar has a certificate of approval issued by the product certifying body accredited by the National Institute of Metrology, Quality and Technology (INMETRO).

CSN 25 Rebar was developed for the most diverse applications using reinforced concrete, and can be sold in straight bar bundles with gauges sized 16.0 to 32 mm, weighting 2,000 kg.

Process Control

The CSN 25 Rebar is produced with rigorous metrological monitoring, where all control, inspection and release processes are carried out by a specialized technical team, using modern laboratories with proper equipment that meet the most stringent standards required by ABNT NBR ISO 10012 and ABNT NBR ISO/IEC 17025 standards.

Mill Test Certificate

Every supply of CSN 25 Rebar comes with a mill testcompliance certificate, where the traceability of the material is ensured individually for each bundle, containing the results obtained in mechanical tests for release.

Identification Label

The bundles of CSN 25 Rebar are identified with a label specifying the product traceability information and INMETRO safety seal.

Wire Rod


Designed with high technology resources from Research and Development, the CSN Wire Rod is produced with innovating features that give the final product a quality for processes of pickling, wire drawing, cold-rolling and mechanical forming, meeting the main national and international standards.

The CSN Wire Rod can be supplied in steel produced through Basic Oxygen and Electric Arc Furnace steelmaking , allowing the use of the product in several applications, from the production of parts with severe cold forming to products of high mechanical strength used in civil construction and industry.

Diameters available for sale (mm)
5.50 6.35 7.00 8.00 9.00 10.00 11.00 12.50 14.30 16.00
Rolls with standard weight of 2,000 kg.
Steels with low, medium and high carbon content.
Process Control

The CSN Wire Rod is produced with rigorous metrological and quality surface monitoring, where all control, inspection and release processes are carried out by a specialized technical team, using modern laboratories with proper equipment that meet the most stringent standards required by ABNT NBR ISO 10012 and ABNT NBR ISO/IEC 17025 standards.

Mill Test Certificate

Every supply of CSN Wire Rod comes with a mill test certificate, where the traceability of the material is ensured individually for each roll produced, containing the results obtained in mechanical tests for release and in chemical analysis.

Identification Label

The rolls have standard weight of 2,000 kg and two identification labels are attached to their ends, with the product‘s tracking information and identifying the correct way to uncoil them.

Structural Shapes


The CSN Structural Shapes are made from 100% recycled steel through a hot-rolling process in modern equipment, ensuring very high control of the product‘s dimensional characteristics and mechanical properties.

With more than 250 types of shapes and meeting the main international technical standards (ABNT, ASTM, DIN, BS, JIS and UIC), the CSN Structural Shapesare supplied in bundles of up to 4,000 kg and with standard length of 12 meters.

Designation x Linear Mass (kg/m) Designation x Linear Mass (kg/m)
W 100 x 19.3 C 200 x 17.1 to C 200 x 27.9
W 130 x 23.8 to W 130 x 28.1 C 250 x 22.8 to C 250 x 45.0
W 150 x 13.0 to W 150 x 37.1 C 310 x 30.8 to C 310 x 45.0
W 200 x 15.0 to W 200 x 100.0 C 380 x 50.4 to C 380 x 74.0
W 250 x 17.9 to W 250 x 44.8
HP 200 x 43.0 to HP 200 x 53
W 310 x 21.0 to W 310 x 52.0
W 360 x 32.9 to W 360 x 58.0
W 410 x 38.8 to W 410 x 85.0
W 460 x 52.0 to W 460 x 106.0
W 530 x 72.0 to W 530 x 123.0
Technical Standards

As a standard of supply, the profiles are produced according to ASTM A6/A6M standard for the dimensional characteristics and the ASTM A36/A36M, ASTM A572/A572M and ASTM A992/A992M standards for mechanical properties.

Mill Test Certificate

Every supply of CSN Structural Shapes comes with a mill test certificate, where the traceability of the material is ensured, containing the results obtained in mechanical tests for release and in chemical analysis.

Identification Label

The bundles come with identification labels on their ends stating the product traceability information. Each bar inside the bundleis individually identified with a label with the profile‘s traceability information and designation.

Packaging

CSN Structural Shapes are packed with metal strips, ensuring the product‘s physical integrity, and ensuring greater safety during handling, storage and transport.

Last Update on November 01, 2016

Back Top